Live Betta Fish Male COPPER MUSTARD GAS Perfect Rosetail Halfmoon Betta HM
Not sure i trust the source, but this fish is beautiful!
- DIY: How to Replace Burners on a Gas Grill No matter what type of gas grill you ever have, you need to replace the burner. Fortunately, finding burners and other gas grill accessories is not difficult. They can usually be found at any store that sells barbecue accessories. Buying barbecue accessories online is easier and cheaper. Using your computer makes it easy to find high quality gas grill accessories at a good price. When you have bought the right BBQ grill accessories, you are ready to remove the old burner and install the new one. The process is relatively simple. It requires no special training or expensive tools. All you need is a well-lit area, an adjustable wrench and the ability to follow simple instructions. It is also important that you do not rush. You work with gas so there is an element of danger. But the average person can surely replace the burner on his gas grill in minutes without any problems at all. The first step is to turn off the gas leading to the grill. This must be done at the connection between the grill and the main gas line. For the average gas grill, all who install the replacement burner have to find the LP tank nozzle and close it. Normally this can be done by simply pressing a lever. Check your owner's manual if you are not sure where the nozzle and lever used to close it are located. If the lever is equipped or otherwise difficult to turn, you may need to place it as well. Once you have placed the LP nozzle and shut off the gas, the next step is to make sure there is no gas in the system. Sometimes you work to remove the burner can create a spark so that there is no gas in the line is very important. To do this, ventilate additional gas in the lines by simply turning on one of the other burners on the gas grill for a few minutes and allowing the gas to leak. While waiting for the gas to leak out, you can use the time to carefully remove the grille. When the gas has been vented from the line and the grill grille has been removed, you are now ready to find the nut that holds the burner in place. You can do this by tracking the main gas line on the grill. The burner is usually held in place with a fair nut. Depending on the model gas grill, you may need to lift the grill slowly to find the nut. Lifting the grill also makes it easier to access the nut. Once you have found the nut, you are ready to remove it. For the next step, you must use your adjustable key. In general, the exhibition nut is quite tight. Place the adjustable wrench on the fairing nut and turn it to the left or counterclockwise. You may need to apply a lot of pressure to make it come loose. Continue turning the nut until.